Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.
Blanks measure 3/4"+ x 5"+.
Tori has a bunch of glitter sitting around from previous blank casting endeavors so she decided to mix all of the orange and black ones together for Pumpkin Smash. The glitter mix is limited so once we run out of the mix we wonít be making any more blanks.
The glitter has been cast in a clear alumilite base. The blanks may look solid in the photos; but they are very clear and when turned to the thinner dimensions of a finished pen, you will definitely notice. Because of this, we recommend painting the interior of the blank after drilling. You can paint the inside of the blank any color you want. The color you choose will really impact the final appearance though.
Our Glitter Alumilite blanks have that butter-smooth turn that you've come to expect from Alumilite, however the glitter does tend to make a mess. Expect to find glitter for a while after you turn. When finishing the Glitter blank, we've found that using a CA finish has given us the smoothest finish. If you donít use a CA Finish (we use a few coats of Super Thin), you can feel the slightest texture of the glitter on the surface of your turned blank.
Small voids in any Glitter blanks are to be expected. We put a lot of glitter in these blanks and some air bubbles and small tear-outs will occur when turning. We recommend using medium viscosity CA glue to fill these voids while the lathe is turned off. Be absolutely sure the CA glue has FULLY cured before you turn the lathe back on.
These Glitter Alumilite blanks are made in-house here at Bear Tooth Woods. We are starting small and only have the molds to make 3/4" x 5" pen blanks, but we have plans to expand if the demand is there from our customers, so let us know. Comments, compliments for Tori, tips, suggestions, complaints, etc. are all appreciated.