Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.
Blanks measure 3/4"+ x 5"+.
These blanks mix fantastic colors of mica powders with just the perfect amount of glitter. We have always felt other blanks needed more glitter, so Bear Tooth Woods decided to start making our own and we have named this line of blanks "Glitter Swirl." Tori is the master of color and she is bringing you imaginative mixes of colors and glitter in these blanks for your projects.
Mystic Magic is a color Tori came up with when she first started playing around with resin casting. She actually custom mixed the purple mica just for this blank. Taking that custom purple and mixing it with a black mica and an Ultra fine Holographic gunmetal glitter and we bring you this Mystic Magic blank that is sure to bewitch you and your customers.
The glitter in this blank has been cast in a clear alumilite base. The blanks may look solid in the photos; but they do have a portion of the blank that is clear and when turned to the thinner dimensions of a finished pen, you likely will notice. Because of this, we recommend painting the interior of this blank after drilling. You can paint the inside of the blank any color you want, however the color you choose will really impact the final appearance.
Our Glitter Alumilite blanks have that butter-smooth turn that you've come to expect from Alumilite, however the glitter does tend to make a mess. Expect to find glitter for a while after you turn. When finishing the Glitter blank, we've found that using a CA finish has given us the smoothest finish. If you don’t use a CA Finish (we use a few coats of Super Thin), you can feel the slightest texture of the glitter on the surface of your turned blank.
Small voids in any Glitter blanks are to be expected. We put a lot of glitter in these blanks and some air bubbles and small tear-outs will occur when turning. We recommend using medium viscosity CA glue to fill these voids while the lathe is turned off. Be absolutely sure the CA glue has FULLY cured before you turn the lathe back on.
These Glitter Swirl Alumilite blanks are made in-house here at Bear Tooth Woods. Comments, compliments for Tori, tips, suggestions, complaints, etc. are all appreciated and help us do our job better.
Video closeup of the blank:
|