Use Synthetic Sand from world class turning Jimmy Clewes to accent your turning or woodworking project. Fill voids in your project material, whether natural or made by you, with this Synthetic Sand to bring a new beauty to the finished work. Or mix with epoxy or lacquer to make it into a paste and use as a grain filler. Choose from a wide variety of colors: Bright & Wild to stand out; Mellow & Tame to blend in; or even Metallic Powders for an even more striking accent.
Jimmy Clewes Synthetic Sand...
• has no silica which can dull your tools
• sands easily
• can be applied using, CA, Epoxy, a Heat Gun, or mixed with a solvent based finish
• has an unlimited shelf life if stored properly -- Keep dry with the lid firmly closed
• comes in 1 ounce jars
Quick Application Directions:
Mix in with epoxy and spread into the void, leaving the epoxy/Synthetic Sand mixture proud on the surface. If using CA glue, fill the void most of the way with thick CA or sawdust and then fill to above the surface with the Synthetic Sand and top with thin CA glue to adhere the Synthetic Sand to the piece. Sand flush to finished surface level.
Click here for a pdf guide, or see the video below. Jimmy starts using the synthetic sand at 4:55 into the video.