Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.
Blanks measure 3/4"+ x 5"+.
These blanks mix fantastic colors of mica powders with just the perfect amount of glitter. We have always felt other blanks needed more glitter, so Bear Tooth Woods decided to start making our own and we have named this line of blanks "Glitter Swirl." Tori is the master of color and she is bringing you fantastic mixes of colors and glitter in these blanks for your projects.
Tori wanted to give her own special spin on an opal-style blank. This blank includes a rainbow of opal colors mixed with black swirls and Mother of Pearl glitter to give it that little extra shimmer. These blanks also remind us of an Abalone shell.
This blank has 6 different colors of mica powder and 2 different sizes of Mother of Pearl glitter. We wish we could see all these colors looking up into the sky at midnight. This blank is spectacular, we expect nothing less from Tori, and it will look fabulous in any of your projects.
The glitter has been cast in a clear alumilite base. The blanks may look solid in the photos; but they are very clear and when turned to the thinner dimensions of a finished pen, you will definitely notice. This blank has very little transparency, but may have some in the lighter areas of the blank on thinner walled kits. Because of this, we recommend painting the interior of the blank after drilling. You can paint the inside of the blank any color you want. The color you choose will really impact the final appearance though.
With the amount of colors in this blank, you may notice it is hard to find a pattern match for 2-tubed kits. The top and the bottom of the blank may look drastically different depending on the pour.
Our Glitter Alumilite blanks have that butter-smooth turn that you've come to expect from Alumilite, however the glitter does tend to make a mess. Expect to find glitter for a while after you turn. When finishing the Glitter blank, we've found that using a CA finish has given us the smoothest finish. If you donít use a CA Finish (we use a few coats of Super Thin), you can feel the slightest texture of the glitter on the surface of your turned blank.
Small voids in any Glitter blanks are to be expected. We put a lot of glitter in these blanks and some air bubbles and small tear-outs will occur when turning. We recommend using medium viscosity CA glue to fill these voids while the lathe is turned off. Be absolutely sure the CA glue has FULLY cured before you turn the lathe back on.
These Glitter Swirl Alumilite blanks are made in-house here at Bear Tooth Woods. We are starting small and only have the molds to make 3/4" x 5" pen blanks. Comments, compliments for Tori, tips, suggestions, complaints, etc. are all appreciated.
Video closeup of the blank: