Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.
Dimensions: 3/4"+ x 5"+
Base Color(s): Clear
Glitter(s): Red/Green Tinsel Glitter, Gold Sparkle Star Glitter, Red Holographic, Silver Holographic and Gold Holographic Glitter
Transparency: Extremely High
- Cast in clear resin - we recommend painting the tube or inside of the blank if using a tubed kit.
- Because of the size of the gold star glitter, you may lose a lot of the gold star shapes on thinner walled kits.
- Shown finished on Cigar tubes. The interior of the blanks were painted green after drilling.
Bear Tooth Woods is bringing you a group of limited-edition Christmas 2021 inspired blanks that will only be available from now through December 8th, 2021. Any blanks on the shelf after that date will still be available for sale, but no additional blanks will be made after that time.
Whether you have a tiny little tree or a giant one that takes up half of your house, trimming the Christmas tree is a beloved holiday tradition that inspired Tori to make this blank. She mixed red/green tinsel glitter with silver holographic, gold holographic and red holographic glitter into clear resin and added a dash of gold star glitter to give you that perfectly decorated tree look for your turning project.
Our Glitter Alumilite blanks have that butter-smooth turn that you've come to expect from Alumilite, however the glitter does tend to make a mess. Expect to find glitter for a while after you turn. When finishing the glitter blank, we've found that using a CA finish has given us the smoothest finish. If you donít use a CA Finish (we use a few coats of Ultra Thin), you might be able to feel the slightest texture of the glitter on the surface of your turned blank.
Small voids in any Glitter blanks are to be expected. We put a lot of glitter in these blanks and some air bubbles and small tear-outs will occur when turning. We recommend using medium viscosity CA glue to fill these voids while the lathe is turned off. Be absolutely sure the CA glue has FULLY cured before you turn the lathe back on.
These Glitter Alumilite blanks are made in-house here at Bear Tooth Woods. Please feel free to email us with any comments, concerns, suggestions, etc about the glitter blanks.