Click photo to enlarge.

Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.

Dimensions: 3/4"+ x 5"+
Material: Alumilite
Base Color(s): Neon Yellow, Vivid Green, Blue-Purple, Interference Green
Glitter(s): Hot Pink - Purple Opalescent Ultrafine Glitter, Neon Yellow Glitter
Transparency: Low
Notes:
- The lighter parts in the blank are not a true white. Those areas actually have a green shimmer that doesn’t show up very well in the photos or video because of how vivid the colors of the neon yellow and green are.

Tori combined Neon Yellow, Vivid Green, Interference Green and Blue-Purple for a color combination that is out of this world. There is a neon yellow glitter mixed in with the neon yellow mica and a pink-purple opalescent ultra fine glitter mixed in with the blue-purple.

These blanks mix fantastic colors of mica powders with just the perfect amount of glitter. We have always felt other blanks needed more glitter, so Bear Tooth Woods decided to start making our own and we have named this line of blanks "Glitter Swirl." Tori is the master of color and she is bringing you imaginative mixes of colors and glitter in these blanks for your projects.

Our Glitter Alumilite blanks have that butter-smooth turn that you've come to expect from Alumilite, however the glitter does tend to make a mess. Expect to find glitter for a while after you turn. When finishing the glitter blank, we've found that using a CA finish has given us the smoothest finish. If you don’t use a CA Finish (we use a few coats of Ultra Thin), you might be able to feel the slightest texture of the glitter on the surface of your turned blank.

Small voids in any Glitter blanks are to be expected. We put a lot of glitter in these blanks and some air bubbles and small tear-outs will occur when turning. We recommend using medium viscosity CA glue to fill these voids while the lathe is turned off. Be absolutely sure the CA glue has FULLY cured before you turn the lathe back on.

These Glitter Swirl Alumilite blanks are made in-house here at Bear Tooth Woods. Comments, compliments for Tori, tips, suggestions, complaints, etc. are all appreciated and help us do our job better.

Video closeup of the blank: