Price is per blank.
This pre-tubed blank is designed for the PSI Steampunk pen and features Aluminum and Copper "plates" placed on the tube with a polyester resin covering that you can turn. The Copper and Aluminum have a lot of steampunk grim on them. A section of the Aluminum is stamped with a BioHazard symbol. The copper section is stamped with a Skull & Crossbones design giving this Steampunk inspired blank a very dangerous feel to it.
The blanks have a forged, industrial, and Steampunk vibe to them. They look spectacular with the choice of platings available for the PSI Steampunk ballpoint pen kits. All of the blanks have different patterns though some look very similar.
The pen blanks are hand-made by a fellow turner in the US. He recommends sealing the ends with thin CA glue after they have been squared/trimmed.
You can finished these blanks with the following steps or by using your own preferred method:
• 400 grit dry sand to shape the profile
• 600 grit wet sand
• 800 grit wet sand
• 1000 grit wet sand
• Micro pad finishing using all of the pads - wet sand
• Plastic polish