Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.
Dimensions: 3/4"+ x 5"+
Base Color(s): Neon Pink Dyed Resin
Glitter(s): Fuchsia Chunky Mix, Neon Pink Glitter, Ultrafine Mother of Pearl Glitter
Transparency: Extremely High
- The resin is dyed so this blank will be highly transparent. We recommend painting the tubes and/or the inside of the blank if using a tubed kit.
- Sierra Vista Tube and Diamond Painting Pen were finished with 4 Coats of CA Ultra Thin and Sanded through 12000.
Bear Tooth Woods is bringing you a group of limited-edition Valentines 2022 inspired blanks that will only be available from now through February 14th, 2022. Any blanks on the shelf after that date will still be available for sale, but no additional blanks will be made after that time.
All the blanks in this Valentines collection were inspired by some of Tori’s favorite love songs. Tori combined neon pink dye, chunky fuchsia glitter mix, neon pink glitter and ultra fine mother of pearl glitter for a sickeningly sweet combo for this blank. The name was inspired by 2 different songs, one called “LOVE SONG” and the other called “Lovesick Girls”. Tori ended up going with the name Lovesick because of the extra loud pink color of the blank.
Our Glitter Alumilite blanks have that butter-smooth turn that you've come to expect from Alumilite, however the glitter does tend to make a mess. Expect to find glitter for a while after you turn. When finishing the glitter blank, we've found that using a CA finish has given us the smoothest finish. If you don’t use a CA Finish (we use a few coats of Ultra Thin), you might be able to feel the slightest texture of the glitter on the surface of your turned blank.
Small voids in any Glitter blanks are to be expected. We put a lot of glitter in these blanks and some air bubbles and small tear-outs will occur when turning. We recommend using medium viscosity CA glue to fill these voids while the lathe is turned off. Be absolutely sure the CA glue has FULLY cured before you turn the lathe back on.
These Glitter Alumilite blanks are made in-house here at Bear Tooth Woods. Please feel free to email us with any comments, concerns, suggestions, etc about the glitter blanks.