Click photo to enlarge.

Price is per blank. The blanks shown are representative of the blank you will receive, but are not necessarily the exact blank you will receive.

Dimensions: 3/4"+ x 5"+
Material: Alumilite
Base Color(s): See photo
Glitter(s): See photo
Transparency: Low-medium
Reason Marked as Second/Test:
- Bad Swirl Patterns, Two-tone cast, Bad Cut

Quantities are strictly limited to the quantity shown. Once the initial quantity of a particular seconds/test color is sold out that listing will be removed.

The term “seconds” is used to describe blanks Tori deemed not up to our quality standards for full price products. The only reason they were deemed seconds is because of a minor flaw like color separation, glitter gaps or size/cut (too small, uneven, etc) inaccuracies. They are all bubble-free and safe for turning.

The Test color blanks are all blanks Tori created in her color lab during testing for blanks she is working on. Some of these Test blanks were early versions of blanks that ended up in our final inventory. There is a small bunch of these blanks in the bags that are completely unique and most likely will never be replicated again.

Tori's Finishing Process
- After sanding through 800 grit wipe down the blank with denatured alcohol and remove the dust from the bubble voids.
- Then apply 3-4 coats of Extra Thick CA finish, allowing each coat to fully cure in between.
- Repeat the above steps if needed until the finish is smooth.
- Sand through 12000 grit and apply final polish.